Skip to main content
Sign in

Install Fusion Enterprise Client (V5) (Fusion Enterprise)


*This article is no longer being updated. Visit the new Therapy Brands Portal.
Copy & paste this article title into the search bar there.
  • Updated

This article will walk you through everything you need to install a new Fusion Enterprise V5 Client on your machine. 

Jump to Section: [System Requirements] [Installation Tips] [Installation Steps]

System Requirements: Fusion Enterprise Version 5

  • Windows 8.1, Windows 10
  • 64-bit OS
  • 4GB of RAM (8GB Recommended)
  • 300MB of hard-disk space
  • 1366x768 Minimum Monitor Resolution (1920x1080 or greater recommended)

[Back to Top]

 

Installation Tips

  1. For installation, make sure you are logged in as the Windows Admin.
  2. Disable User Account Control settings (during installation and while running for the 1st time).
    • In your search bar, enter User Account Control.
    • when the settings come up slide the permissions down to Never.
  3. Make sure the program is allowed through Windows Firewall and any Anti-Virus (AV) software (if needed, turn off Firewall and AV for the installation and auto-update portions of this process). 

[Back to Top]

 

Installation Steps

Step 1: Download the V5Client Installer

  1. Click here to download the V5Client Installer zip file.

Step 2: Unzip the Folder

  1. Go to your Downloads folder and find the v5 Installer and Unzip it (Extract All).
    Extract_Zip_Folder.png

  2. Then double-click where indicated to install.
    Double_Click_to_Install.png

Step 3: Reset Configuration

Once installed, the configuration will have to be reset.

  1. Double-click the v5 icon on the desktop.
  2. Double-click Reset Configuration in the bottom left corner.
    REset_Configuration1.png

  3. Enter the IP and the Port (copy this info from another working CC Client in the Office).
  4. Click Apply to save the changes. 
    REset_Configuration2.png

NOTE: Make sure that the IP and Port were entered correctly (no extra spaces, extra characters, etc.) This may cause a server connection error.

Step 4: Set High DPI Settings

  1. Right-click the v5 icon on your desktop.
  2. Click Open File Location.
  3. Right-click the CCUI.exe and click Properties.
  4. Click the Compatibility tab.
  5. Click Change High DPI settings.
  6. Click the box for Override High DPI Scaling Behavior.
  7. Select Application from the drop-down under Scaling performed by.
  8. Click OK and OK again and close the folder.

Step 5: Log in to Fusion Enterprise. 

  1. Double-click the Clinic Controller V5 Desktop Shortcut.
  2. Enter your Username and Password.
  3. Click OK.
    Login_Screen2.png

NOTE: The first time you log in, the system will Auto Update. Thereafter you can log in as normal.

[Back to Top]

Related articles

Powered by Zendesk